FLUKE 725EX - Aparate masura control osciloscoape modem gsm

FLUKE 725EX - Aparate masura control osciloscoape modem gsm

FLUKE 725EX
Descriere

Fluke-725Ex Intrinsically Safe Multi-function Process Calibrator

Measurement Accuracy
Voltage DC 30.000 V 0.02%+ 2 counts (upper display)
10.000 V 0.02%+ 2 counts (lower display)
90.00 mV 0.02%+ 2 counts
-10.00 mV to 75.00 mV 0.025 % + 1 count (via TC connector)

Current DC 24.000 mA 0.02%+ 2 counts

Resistance 0.0 to 400.0 O 0.1O (4-wire), 0.15O (2- and 3-wire)
401 to 1500 O 0.5O (4-wire), 1O (2- and 3-wire)
1500 to 3200 O 1O (4-wire), 1.5O (2- and 3-wire)

Frequency 2.0 to 1000.0 CPM 0.05 % + 1 count
1.0 to 1100.0 Hz 0.05 % + 1 count
1.00 to 10.00 kHz 0.05 % + 1 count
Sensitivity 1 V peak-to-peak-minimum

Pressure Accuracy from 0.025% of range using any of 8 intrinsic safe pressure modules.
(for detailed specifications refer to pressure modules in options and accessories)
Modules available for differential, gage, vacuum, absolute, dual and high pressure.

Source Accuracy
Voltage DC 100.00 mV 0.02%+2 counts
10.000 V 0.02%+2 counts
-10.00 mV to 75.00 mV 0.025 % + 1 count (via TC connector)

Current DC 24.000 mA (Source) 0.02%+ 2 counts
24.000 mA (Simulate) 0.02%+ 2 counts

Resistance 15.0 to 400.0 O 0.15 O (exc. current 0.15 to 0.5 mA), 0.1 O (exc. current 0.5 to 2 mA)
401 to 1500 O 0.5 O(excitation current 0.05 to 0.8 mA)
1500 to 3200 O 1 O(excitation current 0.05 to 0.4 mA)

Frequency 2.0 to 1000.0 CPM 0.05%
1.0 to 1100.0 Hz 0.05%
1.00 to 10.00 kHz 0.25%
Waveform: 5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples
Measure Accuracy: NI-120 0.2 °C
PT-100 (385) 0.33 °C
PT-100 (393) 0.3 °C
PT-100 (JIS) 0.3 °C
PT-200 (385) 0.2 °C
PT-500 (385) 0.3 °C
PT-1000 (385) 0.2 °C
Resolution: 0.1 °C
J: 0.7 °C
K: 0.8 °C
T: 0.8 °C
E: 0.7 °C
R: 1.8 °C
S: 1.5 °C
B: 1.4 °C
L: 0.7 °C
U: 0.75 °C
N: 0.9 °C
Resolution J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F
XK 0.6°C
BP 1.2°C

Source Accuracy: NI-120 0.2 °C
PT-100 (385) 0.33 °C
PT-100 (393) 0.3 °C
PT-100 (JIS) 0.3 °C
PT-200 (385) 0.2 °C
PT-500 (385) 0.3 °C
PT-1000 (385) 0.2 °C
Resolution: 0.1 °C
Note: Accuracy stated for 4-wire measurement.
J: 0.7 °C
K: 0.8 °C
T: 0.8 °C
E: 0.7 °C
R: 1.4 °C
S: 1.5 °C
B: 1.4 °C
L: 0.7 °C
U: 0.75 °C
N: 0.9 °C
Resolution J, K, T, E, L, N, U: 0.1 °C, B, R, S: 1 °C
XK 0.6°C
BP 1.2°C


Specifications
Ramp Functions Source functions: Voltage, current, resistance, frequency, temperature
Ramps Slow ramp, Fast ramp, 25% step-ramp

Loop Power Function Voltage: 12 V
Accuracy: 10%
Maximum current: 22 mA, short circuit protected

Step Functions Source functions: Voltage, current, resistance, frequency, temperature
Steps 25% of range, 100% of range


Safety Specifications
Agency Approvals ATEX II 1 G EEx ia IIB 171°C
I.S. Class I, Division 1 Groups


Mechanical & General Specifications
Size 130 x 236 x 61 mm
5.188" x 9.291" x 2.402"

Weight 0.85 kg (1.874 lbs.)

Batteries 4 AA alkaline batteries

Battery Replacement Separate battery compartment, accessible without breaking calibration seal

Side port connections Pressure module connector

Pret(fara TVA): €3051.00

Fluke725Ex.pdf